Fitment Pilot
Garage Saved garage
Menu

Mopar 2 inch suspension lift kit

Does the Mopar 2 inch suspension lift kit earn its place over the ReadyLIFT SST leveling and lift kit and the Rough Country leveling and lift kit?

Best fit for shoppers who specifically want the OEM Mopar accessory lift path and a fuller component package.

The Mopar 2 inch suspension lift kit and the ReadyLIFT SST leveling and lift kit and the Rough Country leveling and lift kit solve the same leveling kits need in different ways. This compare holds what each includes, where each stops fitting, and what each asks of the install side by side; price is read after that, on purpose.

Nicole, Fitment Pilot editor

Reviewed by Nicole

Fitment

2019-2026 Ram 1500 Crew Cab 5.7L new-body trucks after OEM accessory checks

Verify first

Use this OEM Mopar lift only when the truck matches the Crew Cab 5.7L new-body application and the current Mopar or dealer fitment selector confirms the exact VIN/application. The 2022 Big Horn 4x4 Crew Cab is a option, but Rebel, air-suspension, and wrong-engine/cab combinations should be filtered out.

Part number
77072424AE
Choose it when
Best fit for shoppers who specifically want the OEM Mopar accessory lift path and a fuller component package.
Pass when
Pass when the truck runs into this: Rebel trim levels
Our cross-product compare

Same category. Different reason to buy.

Evidence level B
Best for
An OEM Mopar 2 inch Ram 1500 lift package with Fox-tuned suspension components for shoppers who want the factory accessory path instead of an aftermarket-only kit.
A ReadyLIFT SST family for shoppers who want vehicle-specific spacer, control-arm, or mild lift packages with official application and warranty checks.
A broad Rough Country suspension family for truck owners comparing front levels, loaded struts, and mild lift kits after exact trim and suspension-package checks.
What's included
Front lift: 2 inches · Install type: OEM suspension lift kit with front shocks, upper control arms, rear shocks, spacers, jounce spacers, and track-bar bracket
Coverage type: Truck lift-kit product family
Exact contents depend on the leveling and lift kit SKU you select for your truck.
Product approach
Compare this as a fuller, higher-cost buying decision rather than only by price against spacer kits.
Prefer Walmart and eBay when exact identity and seller terms are comparable.
Documented fitment only -- no standout approach beyond exact application is recorded for the leveling and lift kit.
Install burden
Moderate install. VIN-level Mopar or dealer selector
Moderate install. exact ReadyLIFT SKU
Moderate install. exact Rough Country SKU
Fitment
Confirm the exact Mopar 2 inch suspension lift kit application for Ram 1500 new-body trucks before ordering.
Confirm the exact ReadyLIFT SST leveling and lift kit application for Ram 1500 SLT Quad Cab 4x4 before ordering.
Confirm the exact Rough Country leveling and lift kit application for Ram 1500 SLT Quad Cab 4x4 before ordering.
Choose it when
Pick the 2 inch suspension lift kit over the ReadyLIFT SST leveling and lift kit and the Rough Country leveling and lift kit when you want an OE-grade replacement with the widest dealer and parts-store availability.
Choose the SST leveling and lift kit when it is the exact match for your truck and the Mopar 2 inch suspension lift kit and the Rough Country leveling and lift kit do not list your application.
Choose the leveling and lift kit when it is the exact match for your truck and the Mopar 2 inch suspension lift kit and the ReadyLIFT SST leveling and lift kit do not list your application.
Current decision file

Mopar 2 inch suspension lift kit

Part 77072424AE

Best for
An OEM Mopar 2 inch Ram 1500 lift package with Fox-tuned suspension components for shoppers who want the factory accessory path instead of an aftermarket-only kit.
What's included
Front lift: 2 inches · Install type: OEM suspension lift kit with front shocks, upper control arms, rear shocks, spacers, jounce spacers, and track-bar bracket
Product approach
Compare this as a fuller, higher-cost buying decision rather than only by price against spacer kits.
Install burden
Moderate install. VIN-level Mopar or dealer selector
Fitment
Confirm the exact Mopar 2 inch suspension lift kit application for Ram 1500 new-body trucks before ordering.
Choose it when
Pick the 2 inch suspension lift kit over the ReadyLIFT SST leveling and lift kit and the Rough Country leveling and lift kit when you want an OE-grade replacement with the widest dealer and parts-store availability.
How we compared

Built from the exact SKU paperwork, the application limits, what comes in the box, the install burden, and where each part can be bought right now. Price is read last, not first.

2in spacertubular UCAhardware x8
In the boxDrawn to explain, not a product photo.
Leveling kits owned fitment checklist visual
Visual unavailable
Illustration
Where to buy it

Price references

No paid offer is live here. Treat any price shown as a reference only, and use the other retailer searches below to check current availability.

No current price reference

Use the retailer searches below and confirm the exact manufacturer part number before ordering.

Other retailers to check

These other-retailer searches use the brand and part number shown on this page. We earn nothing if you buy through them.

Other retailer

Summit Racing

House fitment data and manufacturer spec sheets ride along on their pages, which makes it a good spot to sanity-check the part number.

Search with the brand and part number shown on this page, then confirm the manufacturer part number before ordering.

Search Summit Racing
Other retailer

Walmart

A broad marketplace where third-party sellers vary widely, so check who is actually selling and how returns work.

Search with the brand and part number shown on this page, then verify the exact seller, item condition, fitment, and return terms.

Search Walmart

Price checks build up as sellers are rechecked over time. The seller's checkout page has the final say; make sure stock, exact SKU, and seller details all agree before you order.

Report an issue
Decision trail Check these before you buy.
Part Mopar 2 inch suspension lift kit Part 77072424AE. Mopar resource available.
Fits 2019-2026 Ram 1500 new-body trucks Use this OEM Mopar lift only when the truck matches the Crew Cab 5.7L new-body application and the current Mopar or dealer fitment selector confirms the exact VIN/application. The 2022 Big Horn 4x4 Crew Cab is a option, but Rebel, air-suspension, and wrong-engine/cab combinations should be filtered out.
Watch for Leveling Kits checkout checks Confirm suspension package, air-suspension exclusions, alignment plan, tire clearance, brake-line routing, and warranty impact before checkout.
Other retailer · Seller 2 other retailer searches Search with the brand and part number shown here, then confirm the exact part and fitment with the retailer.
Photos Category visual The photo shows the category, not this exact part; an exact product photo appears once image rights are confirmed.
If unsure Compare, read, or report If the seller page, vehicle details, or photos do not line up, compare sellers, read the guide, or report the issue.
The evidence

Fitment and install resources

Reviewed 2026-06-22

Editorial method

What we checked on this page

We check the Mopar 2 inch suspension lift kit for exact part identity, seller options, stock and price dates, photo rights, and official resources. FitmentPilot combines automated vehicle database indexing with human automotive editorial review. Rather than presenting generic affiliate catalogs, our system evaluates the exact mechanical constraints of each chassis platform — from bolt circle geometry and motion ratios to factory package exclusions — giving truck owners complete confidence before checkout.

Sellers2 seller destinations

Use the available retailer search and confirm the exact part before checkout.

FreshnessConfirm stock at the retailer

Check current stock and price with the retailer before ordering.

PhotosCategory visual only

This photo shows the part category, not this exact product. Confirm SKU, size, and kit contents before ordering.

Resources2 official resources

Install, fitment, spec, or warranty resources are available before checkout.

An exact product photo appears here once image rights are confirmed.

Choose it, pass, or verify

An OEM Mopar 2 inch Ram 1500 lift package with Fox-tuned suspension components for shoppers who want the factory accessory path instead of an aftermarket-only kit.

Choose it if

  • Best fit for shoppers who specifically want the OEM Mopar accessory lift path and a fuller component package.
  • Compare this as a fuller, higher-cost buying decision rather than only by price against spacer kits.
  • Confirm Crew Cab, 5.7L, Rebel and air-suspension exclusions, plus current superseded part-number status before checkout.
  • Use this OEM Mopar lift only when the truck matches the Crew Cab 5.7L new-body application and the current Mopar or dealer fitment selector confirms the exact VIN/application. The 2022 Big Horn 4x4 Crew Cab is a option, but Rebel, air-suspension, and wrong-engine/cab combinations should be filtered out.

Pass if

  • The Mopar 2 inch suspension lift kit is not the right choice when your truck falls outside 2019-2026 Ram 1500 new-body trucks, or its trim, engine, and package cannot be matched to the documented application.
  • Pass when this exclusion applies: Rebel trim levels
  • Choose another kit when the truck needs more height, rear-load support, adjustable damping, or hardware this package does not include.

Verify

  • VIN-level Mopar or dealer selector
  • Current AE part-number suffix and included hardware
  • Alignment and headlight aim after install
  • Year/model/trim matching is strict because this kit is sold as an OEM accessory package. Big Horn 4x4 Crew Cab owners still need to verify engine, cab, Rebel exclusion, air suspension, and supersession details before buying a dealer or marketplace listing.
Workshop & DIY Guidelines

Mopar 2 inch suspension lift kit Installation & Fitment Protocol

Front leveling kits work by adding a top-mount or preload spacer above the factory coilover strut, neutralizing the built-in factory rake. Because independent front suspension operates on a motion ratio (typically ~1:1.5 to 1:2.0), the physical spacer thickness is smaller than the resulting ride height gain. A 1.25-inch thick spacer produces approximately 2.0 inches of net lift at the wheel hub.

Install Difficulty

Shop & Bench Specs

Difficulty: Moderate (3/5)

Estimated Install Time: 2.5 – 4.0 hours (DIY Garage) / 1.5 – 2.5 hours (Pro Shop)

Required Tools

Installation Equipment

  • Heavy-duty hydraulic floor jack (3-ton+) & matching safety jack stands
  • Calibrated torque wrench (50–250 lb-ft range)
  • Metric socket & combination wrench set (15mm, 18mm, 19mm, 21mm, 24mm)
  • Ball joint separator / tie rod puller tool (prevents boot tearing)
Post-Install Safety

Post-Install Protocol

  • Mandatory 4-wheel computer alignment within 50 miles of install to set toe and camber.
  • Re-torque all chassis fasteners, strut top nuts, lower control arm bolts, and wheel lug nuts at 50 and 500 miles.
  • Re-aim headlight vertical cutoffs downward to compensate for raised front nose height.

Wear Triggers & Maintenance Checks

  • Upper ball joint binding at full suspension droop if lift exceeds 2.25 inches without aftermarket control arms.
  • Accelerated inner tire edge wear if alignment toe-in is not corrected post-installation.
  • Front CV axle boot rib-rubbing and grease weeping under sustained 4WD high-speed operation.

Chassis Fitment Context

Ram 1500 DT uses a coilover strut with an IFS motion ratio of ~1:1.68. The rear suspension features a 5-link coil setup that maintains ride comfort but requires careful rear spacer height selection to prevent rear spring unseating at full droop when extending rear shocks.

The 2019 model year split Ram 1500 into two distinct architectures: the continuing 4th Gen Ram Classic (DS platform, 5-lug) and the all-new 5th Gen (DT platform, 6-lug). In 2025, Ram refreshed the DT architecture with the 3.0L Hurricane Twin-Turbo inline-six powertrain, updated front fascia, and electric architecture changes, while preserving the 6x139.7 wheel fitment.

Pre-Installation Unboxing Verification Checklist

Step 01: Confirm Physical SKU & Labeling

Inspect outer box label against your order invoice and the manufacturer part number shown here before opening hardware bags.

Step 02: Dry-Fit & Hardware Inventory

Unpack fasteners, brackets, and instructions. Perform a preliminary dry-fit check against the vehicle before removing factory components.

Step 03: Review Torque & Thread Requirements

Identify critical torque values and whether thread locker (Blue Loctite) or anti-seize compound is required by the manufacturer.

Step 04: Plan Post-Install Calibration

For suspension, steering, or lighting parts, schedule a professional alignment and verify forward-facing ADAS sensor calibration.