Fitment Pilot
Garage Saved garage
Menu

Metra JP-1014 Jeep dash speaker pods

Is the Metra JP-1014 Jeep dash speaker pods the speakers & audio pick here, or just one of three?

Best fit for Jeep Wrangler JL and Gladiator JT owners upgrading the dash/knee-panel speaker pods.

The Metra JP-1014 Jeep dash speaker pods is on this shortlist for a specific truck and use, not because it beats the Metra JP-1015 Jeep soundbar speaker adapter kit and the Metra JP-1019 Jeep soundbar speaker adapter kit on every line. The rows below keep included hardware, the fitment, and install effort in view before any seller price, so the trade stays yours to make.

Nicole, Fitment Pilot editor

Reviewed by Nicole

Fitment

2020-2026 Gladiator dash speaker pods for 6 to 6.75 inch speaker upgrades

Verify first

Use JP-1014 for Gladiator dash speaker-pod planning when the buyer wants to replace the factory dash/knee-panel pod with a sealed enclosure for larger aftermarket speakers.

Choose it when
Best fit for Jeep Wrangler JL and Gladiator JT owners upgrading the dash/knee-panel speaker pods.
Pass when
Choose one of the others when this applies: Soundbar adapters, dash tweeter grilles, subwoofer enclosures, and amplifier kits
Our cross-product compare

Same category. Different reason to buy.

Evidence level B
Best for
A Jeep JL/JT dash speaker-pod upgrade kit for fitting larger 6 to 6.75 inch aftermarket speakers with official Metra instructions and multiple seller listings.
A 2018-2023 Wrangler JL and 2020-2023 Gladiator JT soundbar adapter kit for moving factory soundbar locations to 6.5 inch aftermarket speakers.
A 2024-up Jeep Wrangler JL and Gladiator JT soundbar adapter kit for moving from factory small speakers to larger 6 to 6.75 inch aftermarket speakers.
What's included
Part number: JP-1014 · Accessory type: Jeep dash speaker pods
Part number: JP-1015 · Accessory type: Jeep soundbar speaker adapter kit
Part number: JP-1019 · Accessory type: Jeep soundbar speaker adapter kit
Product approach
Best Buy and eBay rows are grouped under one product slug rather than split into duplicate rows.
Walmart, Sonic Electronix, and Best Buy rows are preserved as separate refreshable seller paths, with Best Buy hidden behind bad-deal controls while it is overpriced.
Walmart, Best Buy, eBay, and Sonic Electronix rows are preserved as separate refreshable seller paths, with Sonic hidden behind bad-deal controls while it is overpriced.
Install burden
Moderate install. Metra JP-1014 application list for the exact Gladiator
Moderate install. Metra JP-1015 application list for the exact Gladiator
Moderate install. Metra JP-1019 application list for the exact Gladiator
Fitment
Confirm the exact Metra JP-1014 Jeep dash speaker pods application for Jeep Gladiator JT pickups before ordering.
Confirm the exact Metra JP-1015 Jeep soundbar speaker adapter kit application for Jeep Gladiator JT pickups before ordering.
Confirm the exact Metra JP-1019 Jeep soundbar speaker adapter kit application for 2024-up Jeep Gladiator JT pickups before ordering.
Choose it when
Choose the JP-1014 Jeep dash speaker pods when it is the exact match for your truck and the Metra JP-1015 Jeep soundbar speaker adapter kit and the Metra JP-1019 Jeep soundbar speaker adapter kit do not list your application.
Choose the JP-1015 Jeep soundbar speaker adapter kit when it is the exact match for your truck and the Metra JP-1014 Jeep dash speaker pods and the Metra JP-1019 Jeep soundbar speaker adapter kit do not list your application.
Choose the JP-1019 Jeep soundbar speaker adapter kit when it is the exact match for your truck and the Metra JP-1014 Jeep dash speaker pods and the Metra JP-1015 Jeep soundbar speaker adapter kit do not list your application.
Current decision file

Metra JP-1014 Jeep dash speaker pods

Best for
A Jeep JL/JT dash speaker-pod upgrade kit for fitting larger 6 to 6.75 inch aftermarket speakers with official Metra instructions and multiple seller listings.
What's included
Part number: JP-1014 · Accessory type: Jeep dash speaker pods
Product approach
Best Buy and eBay rows are grouped under one product slug rather than split into duplicate rows.
Install burden
Moderate install. Metra JP-1014 application list for the exact Gladiator
Fitment
Confirm the exact Metra JP-1014 Jeep dash speaker pods application for Jeep Gladiator JT pickups before ordering.
Choose it when
Choose the JP-1014 Jeep dash speaker pods when it is the exact match for your truck and the Metra JP-1015 Jeep soundbar speaker adapter kit and the Metra JP-1019 Jeep soundbar speaker adapter kit do not list your application.
How we compared

These line up on documented fitment, package contents, install effort, and live seller access -- not on marketing copy or star counts. Where the evidence runs out, the row says so.

Audio fitment owned fitment checklist visual
Visual unavailable
Illustration
Where to buy it

Seller offers

Each seller on its own terms - prices and stock reflect the date shown with each seller and can change; the seller's checkout price is final.

Paid link

Amazon

Worth a look when the exact part number is sold direct, but confirm the seller of record before you order.

Price, availability, seller details, ratings, and reviews are shown only on Amazon.

As an Amazon Associate I earn from qualifying purchases.

Available at Amazon

Other retailers to check

These other-retailer searches use the brand and part number shown on this page. We earn nothing if you buy through them.

Other retailer

Summit Racing

House fitment data and manufacturer spec sheets ride along on their pages, which makes it a good spot to sanity-check the part number.

Search with the brand and part number shown on this page, then confirm the manufacturer part number before ordering.

Search Summit Racing
Other retailer

Walmart

A broad marketplace where third-party sellers vary widely, so check who is actually selling and how returns work.

Search with the brand and part number shown on this page, then verify the exact seller, item condition, fitment, and return terms.

Search Walmart

Price checks build up as sellers are rechecked over time. The seller's checkout page has the final say; make sure stock, exact SKU, and seller details all agree before you order.

Report an issue
Direct retailer Amazon Check price and availability there As an Amazon Associate I earn from qualifying purchases.
Available at Amazon
Decision trail Check these before you buy.
Part Metra JP-1014 Jeep dash speaker pods Metra resource available.
Fits 2020-2026 Jeep Gladiator JT pickups Use JP-1014 for Gladiator dash speaker-pod planning when the buyer wants to replace the factory dash/knee-panel pod with a sealed enclosure for larger aftermarket speakers.
Watch for Speakers & Audio checkout checks Confirm factory audio package, amplifier or ANC setup, speaker location, harness adapter, impedance, terminal polarity, and mounting depth before checkout.
Other retailer · Seller 2 other retailer searches Search with the brand and part number shown here, then confirm the exact part and fitment with the retailer.
Photos Category visual The photo shows the category, not this exact part; an exact product photo appears once image rights are confirmed.
If unsure Compare, read, or report If the seller page, vehicle details, or photos do not line up, compare sellers, read the guide, or report the issue.
The evidence

Fitment and install resources

Reviewed 2026-06-25

Editorial method

What we checked on this page

We check the Metra JP-1014 Jeep dash speaker pods for exact part identity, seller options, stock and price dates, photo rights, and official resources. FitmentPilot combines automated vehicle database indexing with human automotive editorial review. Rather than presenting generic affiliate catalogs, our system evaluates the exact mechanical constraints of each chassis platform — from bolt circle geometry and motion ratios to factory package exclusions — giving truck owners complete confidence before checkout.

Sellers3 seller destinations

Paid offers and other retailer searches are labeled separately so you can choose where to check.

FreshnessConfirm stock at the retailer

Check current stock and price with the retailer before ordering.

PhotosCategory visual only

This photo shows the part category, not this exact product. Confirm SKU, size, and kit contents before ordering.

Resources3 official resources

Install, fitment, spec, or warranty resources are available before checkout.

An exact product photo appears here once image rights are confirmed.

Choose it, pass, or verify

A Jeep JL/JT dash speaker-pod upgrade kit for fitting larger 6 to 6.75 inch aftermarket speakers with official Metra instructions and multiple seller listings.

Choose it if

  • Best fit for Jeep Wrangler JL and Gladiator JT owners upgrading the dash/knee-panel speaker pods.
  • Best Buy and eBay rows are grouped under one product slug rather than split into duplicate rows.
  • Do not use this for soundbar, amplifier, subwoofer, or lower-dash grille jobs.
  • Use JP-1014 for Gladiator dash speaker-pod planning when the buyer wants to replace the factory dash/knee-panel pod with a sealed enclosure for larger aftermarket speakers.

Pass if

  • The Metra JP-1014 Jeep dash speaker pods is not the right choice when your truck falls outside 2020-2026 Jeep Gladiator JT pickups, or its trim, engine, and package cannot be matched to the documented application.
  • Pass when this exclusion applies: Soundbar adapters, dash tweeter grilles, subwoofer enclosures, and amplifier kits
  • Choose another harness or speaker path when the factory amplifier, ANC package, connector, impedance, or mounting depth does not match this application.

Verify

  • Metra JP-1014 application list for the exact Gladiator
  • Speaker depth, dash location, harness, and factory audio package
  • Seller stock, quantity, returns, and exact JP-1014 SKU
  • The public route is a 2024 Gladiator Rubicon. Verify JL/JT dash location, factory wiring grommet, speaker depth, premium audio, and installer disassembly steps before purchasing.
Workshop & DIY Guidelines

Metra JP-1014 Jeep dash speaker pods Installation & Fitment Protocol

Direct-fit automotive parts are engineered to integrate with factory mounting points, electrical connectors, and body clearances without permanent modification. Always double-check trim and powertrain compatibility before installation.

Install Difficulty

Shop & Bench Specs

Difficulty: Moderate (2/5)

Estimated Install Time: 1.0 – 2.5 hours

Required Tools

Installation Equipment

  • Standard and metric hand tool set
  • Calibrated torque wrench
  • Safety glasses and protective gloves
  • Vehicle shop manual or manufacturer instruction sheet
Post-Install Safety

Post-Install Protocol

  • Confirm all fasteners are tightened to specified torque values.
  • Perform a functional inspection and test drive before returning vehicle to full service.
  • Re-inspect all fasteners after 100 miles of operation.

Wear Triggers & Maintenance Checks

  • Fastener backing out under sustained vibration if thread locker was omitted.
  • Surface finish oxidation when exposed to road de-icing chemicals.
  • Bushing degradation from environmental ozone exposure.

Chassis Fitment Context

Direct-fit automotive parts are engineered around specific chassis mounting coordinates, suspension stroke limits, and load capacities. Ensuring compatibility requires cross-referencing vehicle year, trim, powertrain, and suspension package options.

Automotive platforms undergo major architectural overhauls approximately every 6 to 8 years, accompanied by mid-cycle refreshes every 3 to 4 years that often revise bumper valances, headlight housings, wiring harnesses, and suspension damping calibrations.

Pre-Installation Unboxing Verification Checklist

Step 01: Confirm Physical SKU & Labeling

Inspect outer box label against your order invoice and the manufacturer part number shown here before opening hardware bags.

Step 02: Dry-Fit & Hardware Inventory

Unpack fasteners, brackets, and instructions. Perform a preliminary dry-fit check against the vehicle before removing factory components.

Step 03: Review Torque & Thread Requirements

Identify critical torque values and whether thread locker (Blue Loctite) or anti-seize compound is required by the manufacturer.

Step 04: Plan Post-Install Calibration

For suspension, steering, or lighting parts, schedule a professional alignment and verify forward-facing ADAS sensor calibration.