Fitment Pilot
Garage Saved garage
Menu

Daystar KJ09182BK JL/JT 0.75 inch front leveling spacers

Does the Daystar KJ09182BK JL/JT 0.75 inch front leveling spacers earn its place over the Bilstein B8 5100 ride-height adjustable suspension and the Rough Country leveling and lift kit?

Best fit for Gladiator owners who want a mild front level instead of a taller 1.5 to 2.5 inch kit.

The Daystar KJ09182BK JL/JT 0.75 inch front leveling spacers is on this shortlist for a specific truck and use, not because it beats the Bilstein B8 5100 ride-height adjustable suspension and the Rough Country leveling and lift kit on every line. The rows below keep included hardware, the fitment, and install effort in view before any seller price, so the trade stays yours to make.

Nicole, Fitment Pilot editor

Reviewed by Nicole

Fitment

2020-2026 Jeep Gladiator JT, with current seller fitment confirmation

Verify first

Use KJ09182BK when the truck is a Gladiator JT pickup and the buyer wants only a mild front spacer. Rubicon 35 inch planning still depends on wheel backspacing, tire width, fender clearance, and the current seller fitment table.

Part number
KJ09182BK
Choose it when
Best fit for Gladiator owners who want a mild front level instead of a taller 1.5 to 2.5 inch kit.
Pass when
Choose one of the others when this applies: Wrangler-only fitment without JT seller support
Our cross-product compare

Same category. Different reason to buy.

Evidence level B
Best for
A mild front spacer option for Gladiator JT shoppers who want to reduce front rake without jumping to a taller lift kit, while still checking JT year, trim, wheel, and tire notes.
A Bilstein 5100-based leveling family for owners who prefer shock or strut height adjustment instead of a simple spacer-only kit.
A broad Rough Country suspension family for truck owners comparing front levels, loaded struts, and mild lift kits after exact trim and suspension-package checks.
What's included
Front lift: 0.75 inches · Install type: Front coil spring spacer pair
Coverage type: Truck lift-kit product family
Exact contents depend on the leveling and lift kit SKU you select for your truck.
Product approach
Use Daystar direct or ExtremeTerrain for low-price exact-SKU context, then compare eBay when marketplace checkout matters.
Prefer Walmart and eBay when exact identity and seller terms are comparable.
Documented fitment only -- no standout approach beyond exact application is recorded for the leveling and lift kit.
Install burden
Moderate install. Exact KJ09182BK SKU
Moderate install. front and rear part numbers
Moderate install. exact Rough Country SKU
Fitment
Confirm the exact Daystar KJ09182BK JL/JT 0.75 inch front leveling spacers application for Jeep Gladiator JT pickup trucks before ordering.
Confirm the exact Bilstein B8 5100 ride-height adjustable suspension application for Ford F-150 XLT SuperCab 4x4 before ordering.
Confirm the exact Rough Country leveling and lift kit application for Ram 1500 SLT Quad Cab 4x4 before ordering.
Choose it when
Choose the KJ09182BK JL/JT 0.75 inch front leveling spacers when it is the exact match for your truck and the Bilstein B8 5100 ride-height adjustable suspension and the Rough Country leveling and lift kit do not list your application.
Pick the B8 5100 ride-height adjustable suspension over the Daystar KJ09182BK JL/JT 0.75 inch front leveling spacers and the Rough Country leveling and lift kit when you want to set the front ride height yourself instead of a fixed part.
Choose the leveling and lift kit when it is the exact match for your truck and the Daystar KJ09182BK JL/JT 0.75 inch front leveling spacers and the Bilstein B8 5100 ride-height adjustable suspension do not list your application.
Current decision file

Daystar KJ09182BK JL/JT 0.75 inch front leveling spacers

Part KJ09182BK

Best for
A mild front spacer option for Gladiator JT shoppers who want to reduce front rake without jumping to a taller lift kit, while still checking JT year, trim, wheel, and tire notes.
What's included
Front lift: 0.75 inches · Install type: Front coil spring spacer pair
Product approach
Use Daystar direct or ExtremeTerrain for low-price exact-SKU context, then compare eBay when marketplace checkout matters.
Install burden
Moderate install. Exact KJ09182BK SKU
Fitment
Confirm the exact Daystar KJ09182BK JL/JT 0.75 inch front leveling spacers application for Jeep Gladiator JT pickup trucks before ordering.
Choose it when
Choose the KJ09182BK JL/JT 0.75 inch front leveling spacers when it is the exact match for your truck and the Bilstein B8 5100 ride-height adjustable suspension and the Rough Country leveling and lift kit do not list your application.
How we compared

These line up on documented fitment, package contents, install effort, and live seller access -- not on marketing copy or star counts. Where the evidence runs out, the row says so.

2in spacertubular UCAhardware x8
In the boxDrawn to explain, not a product photo.
Leveling kits owned fitment checklist visual
Visual unavailable
Illustration
Where to buy it

Seller offers

Each seller on its own terms - prices and stock reflect the date shown with each seller and can change; the seller's checkout price is final.

Paid link

Amazon

Worth a look when the exact part number is sold direct, but confirm the seller of record before you order.

Price, availability, seller details, ratings, and reviews are shown only on Amazon.

As an Amazon Associate I earn from qualifying purchases.

Available at Amazon

Other retailers to check

These other-retailer searches use the brand and part number shown on this page. We earn nothing if you buy through them.

Other retailer

Summit Racing

House fitment data and manufacturer spec sheets ride along on their pages, which makes it a good spot to sanity-check the part number.

Search with the brand and part number shown on this page, then confirm the manufacturer part number before ordering.

Search Summit Racing
Other retailer

Walmart

A broad marketplace where third-party sellers vary widely, so check who is actually selling and how returns work.

Search with the brand and part number shown on this page, then verify the exact seller, item condition, fitment, and return terms.

Search Walmart

Price checks build up as sellers are rechecked over time. The seller's checkout page has the final say; make sure stock, exact SKU, and seller details all agree before you order.

Report an issue
Direct retailer Amazon Check price and availability there As an Amazon Associate I earn from qualifying purchases.
Available at Amazon
Decision trail Check these before you buy.
Part Daystar KJ09182BK JL/JT 0.75 inch front leveling spacers Part KJ09182BK. Daystar resource available.
Fits 2020-2026 Jeep Gladiator JT pickup trucks Use KJ09182BK when the truck is a Gladiator JT pickup and the buyer wants only a mild front spacer. Rubicon 35 inch planning still depends on wheel backspacing, tire width, fender clearance, and the current seller fitment table.
Watch for Leveling Kits checkout checks Confirm suspension package, air-suspension exclusions, alignment plan, tire clearance, brake-line routing, and warranty impact before checkout.
Other retailer · Seller 2 other retailer searches Search with the brand and part number shown here, then confirm the exact part and fitment with the retailer.
Photos Category visual The photo shows the category, not this exact part; an exact product photo appears once image rights are confirmed.
If unsure Compare, read, or report If the seller page, vehicle details, or photos do not line up, compare sellers, read the guide, or report the issue.
The evidence

Fitment and install resources

Reviewed 2026-06-25

Editorial method

What we checked on this page

We check the Daystar KJ09182BK JL/JT 0.75 inch front leveling spacers for exact part identity, seller options, stock and price dates, photo rights, and official resources. FitmentPilot combines automated vehicle database indexing with human automotive editorial review. Rather than presenting generic affiliate catalogs, our system evaluates the exact mechanical constraints of each chassis platform — from bolt circle geometry and motion ratios to factory package exclusions — giving truck owners complete confidence before checkout.

Sellers3 seller destinations

Paid offers and other retailer searches are labeled separately so you can choose where to check.

FreshnessConfirm stock at the retailer

Check current stock and price with the retailer before ordering.

PhotosCategory visual only

This photo shows the part category, not this exact product. Confirm SKU, size, and kit contents before ordering.

Resources2 official resources

Install, fitment, spec, or warranty resources are available before checkout.

An exact product photo appears here once image rights are confirmed.

Choose it, pass, or verify

A mild front spacer option for Gladiator JT shoppers who want to reduce front rake without jumping to a taller lift kit, while still checking JT year, trim, wheel, and tire notes.

Choose it if

  • Best fit for Gladiator owners who want a mild front level instead of a taller 1.5 to 2.5 inch kit.
  • Use Daystar direct or ExtremeTerrain for low-price exact-SKU context, then compare eBay when marketplace checkout matters.
  • Confirm Gladiator JT year, Rubicon/non-Rubicon tire guidance, wheel backspacing, trim package, and current seller fitment before checkout.
  • Use KJ09182BK when the truck is a Gladiator JT pickup and the buyer wants only a mild front spacer. Rubicon 35 inch planning still depends on wheel backspacing, tire width, fender clearance, and the current seller fitment table.

Pass if

  • The Daystar KJ09182BK JL/JT 0.75 inch front leveling spacers is not the right choice when your truck falls outside 2020-2026 Jeep Gladiator JT pickup trucks, or its trim, engine, and package cannot be matched to the documented application.
  • Pass when this exclusion applies: Wrangler-only fitment without JT seller support
  • Choose another kit when the truck needs more height, rear-load support, adjustable damping, or hardware this package does not include.

Verify

  • Exact KJ09182BK SKU
  • Current seller fitment for the buyer's Gladiator JT year and trim
  • Wheel backspacing, tire diameter, tire width, and post-install alignment plan
  • The checked public shelf is a 2024 Rubicon Crew Cab 4x4 route. Sport, Willys, Overland, Mojave, diesel, dealer-lift, heavy bumper, winch, and aggressive-offset setups need current seller and clearance checks before inheriting this answer.
Workshop & DIY Guidelines

Daystar KJ09182BK JL/JT 0.75 inch front leveling spacers Installation & Fitment Protocol

Front leveling kits work by adding a top-mount or preload spacer above the factory coilover strut, neutralizing the built-in factory rake. Because independent front suspension operates on a motion ratio (typically ~1:1.5 to 1:2.0), the physical spacer thickness is smaller than the resulting ride height gain. A 1.25-inch thick spacer produces approximately 2.0 inches of net lift at the wheel hub.

Install Difficulty

Shop & Bench Specs

Difficulty: Moderate (3/5)

Estimated Install Time: 2.5 – 4.0 hours (DIY Garage) / 1.5 – 2.5 hours (Pro Shop)

Required Tools

Installation Equipment

  • Heavy-duty hydraulic floor jack (3-ton+) & matching safety jack stands
  • Calibrated torque wrench (50–250 lb-ft range)
  • Metric socket & combination wrench set (15mm, 18mm, 19mm, 21mm, 24mm)
  • Ball joint separator / tie rod puller tool (prevents boot tearing)
Post-Install Safety

Post-Install Protocol

  • Mandatory 4-wheel computer alignment within 50 miles of install to set toe and camber.
  • Re-torque all chassis fasteners, strut top nuts, lower control arm bolts, and wheel lug nuts at 50 and 500 miles.
  • Re-aim headlight vertical cutoffs downward to compensate for raised front nose height.

Wear Triggers & Maintenance Checks

  • Upper ball joint binding at full suspension droop if lift exceeds 2.25 inches without aftermarket control arms.
  • Accelerated inner tire edge wear if alignment toe-in is not corrected post-installation.
  • Front CV axle boot rib-rubbing and grease weeping under sustained 4WD high-speed operation.

Chassis Fitment Context

Solid front axle geometry dictates that coil spring height translates 1:1 to lift height (unlike IFS motion ratios). However, raising the front un-rotates the axle, reducing positive caster and causing flighty highway steering. Geometry correction brackets or adjustable front lower control arms are critical on lifts 2.0" and higher.

The JL Wrangler debuted in 2018 and the JT Gladiator in 2020, replacing the JK platform with aluminum doors/hood and electro-hydraulic steering. In 2024, Jeep introduced standard side-curtain airbags, redesigned 7-slot grilles, standard 12.3-inch Uconnect screens, and full-float Dana 44 rear axles on Rubicon trims.

Pre-Installation Unboxing Verification Checklist

Step 01: Confirm Physical SKU & Labeling

Inspect outer box label against your order invoice and the manufacturer part number shown here before opening hardware bags.

Step 02: Dry-Fit & Hardware Inventory

Unpack fasteners, brackets, and instructions. Perform a preliminary dry-fit check against the vehicle before removing factory components.

Step 03: Review Torque & Thread Requirements

Identify critical torque values and whether thread locker (Blue Loctite) or anti-seize compound is required by the manufacturer.

Step 04: Plan Post-Install Calibration

For suspension, steering, or lighting parts, schedule a professional alignment and verify forward-facing ADAS sensor calibration.