Fitment Pilot
Garage Saved garage
Menu

ARB Twin Motor Onboard Air Compressor

Is the ARB Twin Motor Onboard Air Compressor the off-road lighting & electrical pick here, or just one of three?

Match the product family to exact bumper, grille, hood, cowl, roof, rack, underbody, switch, battery, alternator, and sensor/camera context before opening seller lanes.

The ARB Twin Motor Onboard Air Compressor is on this shortlist for a specific truck and use, not because it beats the Baja Designs LED rock light kit and the Baja Designs OnX6+ LED light bar on every line. The rows below keep included hardware, the fitment, and install effort in view before any seller price, so the trade stays yours to make.

Nicole, Fitment Pilot editor

Reviewed by Nicole

Fitment

ARB Twin Motor Onboard Air Compressor family application check for Ford F-150

Verify first

Select the exact ARB Twin Motor Onboard compressor by voltage, mount location, wiring kit, fuse and relay capacity, switch location, air tank or locker use, hose routing, and duty cycle.

Choose it when
Match the product family to exact bumper, grille, hood, cowl, roof, rack, underbody, switch, battery, alternator, and sensor/camera context before opening seller lanes.
Pass when
Choose one of the others when this applies: portable-only compressors counted as onboard
Our cross-product compare

Same category. Different reason to buy.

Evidence level B
Best for
An onboard air compressor family for matching 12V electrical load, mounting location, relay and fuse capacity, battery/alternator headroom, air line routing, heat, water exposure, tire inflation duty cycle, and switch...
A rock light kit family for matching wheel-well, frame, bumper, bed, or underbody mounting to wire routing, waterproof connectors, switch panel control, fuse load, battery draw, trail-only legality, and heat/abrasion...
A high-output LED light bar family for matching bumper, grille, hood, or roof mounts to amperage draw, relay and fuse sizing, alternator/battery headroom, sensor/camera clearance, CAN bus risk, and state-road legality.
What's included
Coverage type: Reviewed vehicle-specific product family
Exact contents depend on the LED rock light kit SKU you select for your truck.
Exact contents depend on the OnX6+ LED light bar SKU you select for your truck.
Product approach
Confirm amperage draw, relay and fuse sizing, wire gauge, battery reserve, alternator output, CAN bus isolation, waterproofing, heat, abrasion, and service access.
Documented fitment only -- no standout approach beyond exact application is recorded for the LED rock light kit.
Documented fitment only -- no standout approach beyond exact application is recorded for the OnX6+ LED light bar.
Install burden
Moderate install. mount location, heat, water, and service access
Moderate install. underbody, frame, wheel-well, rocker, bumper, or bed mount
Moderate install. bumper, grille, hood, or roof mount
Fitment
Confirm the exact ARB Twin Motor Onboard Air Compressor application for Ford F-150 before ordering.
Confirm the exact Baja Designs LED rock light kit application for Ford F-150 before ordering.
Confirm the exact Baja Designs OnX6+ LED light bar application for Ford F-150 before ordering.
Choose it when
Choose the Twin Motor Onboard Air Compressor when it is the exact match for your truck and the Baja Designs LED rock light kit and the Baja Designs OnX6+ LED light bar do not list your application.
Choose the LED rock light kit when it is the exact match for your truck and the ARB Twin Motor Onboard Air Compressor and the Baja Designs OnX6+ LED light bar do not list your application.
Choose the OnX6+ LED light bar when it is the exact match for your truck and the ARB Twin Motor Onboard Air Compressor and the Baja Designs LED rock light kit do not list your application.
Current decision file

ARB Twin Motor Onboard Air Compressor

Best for
An onboard air compressor family for matching 12V electrical load, mounting location, relay and fuse capacity, battery/alternator headroom, air line routing, heat, water exposure, tire inflation duty cycle, and switch...
What's included
Coverage type: Reviewed vehicle-specific product family
Product approach
Confirm amperage draw, relay and fuse sizing, wire gauge, battery reserve, alternator output, CAN bus isolation, waterproofing, heat, abrasion, and service access.
Install burden
Moderate install. mount location, heat, water, and service access
Fitment
Confirm the exact ARB Twin Motor Onboard Air Compressor application for Ford F-150 before ordering.
Choose it when
Choose the Twin Motor Onboard Air Compressor when it is the exact match for your truck and the Baja Designs LED rock light kit and the Baja Designs OnX6+ LED light bar do not list your application.
How we compared

These line up on documented fitment, package contents, install effort, and live seller access -- not on marketing copy or star counts. Where the evidence runs out, the row says so.

Trail wiring owned fitment checklist visual
Visual unavailable
Illustration
Where to buy it

Price references

No paid offer is live here. Treat any price shown as a reference only, and use the other retailer searches below to check current availability.

No current price reference

Use the retailer searches below and confirm the exact manufacturer part number before ordering.

Other retailers to check

These other-retailer searches use the brand and part number shown on this page. We earn nothing if you buy through them.

Other retailer

Summit Racing

House fitment data and manufacturer spec sheets ride along on their pages, which makes it a good spot to sanity-check the part number.

Search with the brand and part number shown on this page, then confirm the manufacturer part number before ordering.

Search Summit Racing
Other retailer

Walmart

A broad marketplace where third-party sellers vary widely, so check who is actually selling and how returns work.

Search with the brand and part number shown on this page, then verify the exact seller, item condition, fitment, and return terms.

Search Walmart

Price checks build up as sellers are rechecked over time. The seller's checkout page has the final say; make sure stock, exact SKU, and seller details all agree before you order.

Report an issue
Decision trail Check these before you buy.
Part ARB Twin Motor Onboard Air Compressor ARB resource available.
Fits 2015-current Ford F-150 Select the exact ARB Twin Motor Onboard compressor by voltage, mount location, wiring kit, fuse and relay capacity, switch location, air tank or locker use, hose routing, and duty cycle.
Watch for Off-Road Lighting & Electrical checkout checks mount location, heat, water, and service access
Other retailer · Seller 2 other retailer searches Search with the brand and part number shown here, then confirm the exact part and fitment with the retailer.
Photos Category visual The photo shows the category, not this exact part; an exact product photo appears once image rights are confirmed.
If unsure Compare, read, or report If the seller page, vehicle details, or photos do not line up, compare sellers, read the guide, or report the issue.
The evidence

Fitment and install resources

Reviewed 2026-06-27

Editorial method

What we checked on this page

We check the ARB Twin Motor Onboard Air Compressor for exact part identity, seller options, stock and price dates, photo rights, and official resources. FitmentPilot combines automated vehicle database indexing with human automotive editorial review. Rather than presenting generic affiliate catalogs, our system evaluates the exact mechanical constraints of each chassis platform — from bolt circle geometry and motion ratios to factory package exclusions — giving truck owners complete confidence before checkout.

Sellers2 seller destinations

Use the available retailer search and confirm the exact part before checkout.

FreshnessConfirm stock at the retailer

Check current stock and price with the retailer before ordering.

PhotosCategory visual only

This photo shows the part category, not this exact product. Confirm SKU, size, and kit contents before ordering.

Resources2 official resources

Install, fitment, spec, or warranty resources are available before checkout.

An exact product photo appears here once image rights are confirmed.

Choose it, pass, or verify

An onboard air compressor family for matching 12V electrical load, mounting location, relay and fuse capacity, battery/alternator headroom, air line routing, heat, water exposure, tire inflation duty cycle, and switch control.

Choose it if

  • Match the product family to exact bumper, grille, hood, cowl, roof, rack, underbody, switch, battery, alternator, and sensor/camera context before opening seller lanes.
  • Confirm amperage draw, relay and fuse sizing, wire gauge, battery reserve, alternator output, CAN bus isolation, waterproofing, heat, abrasion, and service access.
  • Keep unfused wiring, unsafe loads, guessed switch taps, unavailable camera/sensor installs, and unsupported road-legal claims out of public product rows.
  • Select the exact ARB Twin Motor Onboard compressor by voltage, mount location, wiring kit, fuse and relay capacity, switch location, air tank or locker use, hose routing, and duty cycle.

Pass if

  • The ARB Twin Motor Onboard Air Compressor is not the right choice when your truck falls outside 2015-current Ford F-150, or its trim, engine, and package cannot be matched to the documented application.
  • Pass when this exclusion applies: portable-only compressors counted as onboard
  • Choose another option when the exact vehicle, installation requirements, included hardware, or return terms fall outside this product's documented scope.

Verify

  • mount location, heat, water, and service access
  • 12V load, relay, fuse, wire gauge, alternator, and battery limits
  • air line routing, switch location, duty cycle, CAN bus risk, and seller fitment tool
  • Confirm engine-bay, bed, cargo, or under-seat mount, heat and water exposure, 12V battery path, alternator reserve, fuse and relay size, wire gauge, switch location, air line routing, locker or tire-inflation duty cycle, service access, and CAN bus isolation.
Workshop & DIY Guidelines

ARB Twin Motor Onboard Air Compressor Installation & Fitment Protocol

Direct-fit automotive parts are engineered to integrate with factory mounting points, electrical connectors, and body clearances without permanent modification. Always double-check trim and powertrain compatibility before installation.

Install Difficulty

Shop & Bench Specs

Difficulty: Moderate (2/5)

Estimated Install Time: 1.0 – 2.5 hours

Required Tools

Installation Equipment

  • Standard and metric hand tool set
  • Calibrated torque wrench
  • Safety glasses and protective gloves
  • Vehicle shop manual or manufacturer instruction sheet
Post-Install Safety

Post-Install Protocol

  • Confirm all fasteners are tightened to specified torque values.
  • Perform a functional inspection and test drive before returning vehicle to full service.
  • Re-inspect all fasteners after 100 miles of operation.

Wear Triggers & Maintenance Checks

  • Fastener backing out under sustained vibration if thread locker was omitted.
  • Surface finish oxidation when exposed to road de-icing chemicals.
  • Bushing degradation from environmental ozone exposure.

Chassis Fitment Context

Direct-fit automotive parts are engineered around specific chassis mounting coordinates, suspension stroke limits, and load capacities. Ensuring compatibility requires cross-referencing vehicle year, trim, powertrain, and suspension package options.

Automotive platforms undergo major architectural overhauls approximately every 6 to 8 years, accompanied by mid-cycle refreshes every 3 to 4 years that often revise bumper valances, headlight housings, wiring harnesses, and suspension damping calibrations.

Pre-Installation Unboxing Verification Checklist

Step 01: Confirm Physical SKU & Labeling

Inspect outer box label against your order invoice and the manufacturer part number shown here before opening hardware bags.

Step 02: Dry-Fit & Hardware Inventory

Unpack fasteners, brackets, and instructions. Perform a preliminary dry-fit check against the vehicle before removing factory components.

Step 03: Review Torque & Thread Requirements

Identify critical torque values and whether thread locker (Blue Loctite) or anti-seize compound is required by the manufacturer.

Step 04: Plan Post-Install Calibration

For suspension, steering, or lighting parts, schedule a professional alignment and verify forward-facing ADAS sensor calibration.